Home > News > Industry News > Automatic Capsule Filling Machine abnormal conditions and warranty maintenance

Automatic Capsule Filling Machine abnormal conditions and warranty maintenance

Jan. 16, 2020

Exceptions of Automatic Capsule Filling Machine:

When there is too much difference in loading, there is no fixed method for this. Readjust the filling rod. This reason is basically directly related to medicinal powder. If it is related to the medicinal powder, for the sake of equipment, please directly reject the filling and ask the granulating post to rework.

The distance between the scraper and the dose plate should be 0.5 mm, as long as it does not touch the dose plate. Increase or decrease the distance can directly affect the loading. Sometimes the loading is low, you can try to increase the distance. If the filling rod is not pressurized at the shortest distance, the loading is too high, please directly ask the granulator to rework.

The bearings at the exit of the finished product, the lock, and the rejection of the waste capsule are blocked, basically because the medicine powder comes in. Please clean the bearings in time and apply a suitable amount of oil. The butter in these places is stronger than the oil. After cleaning, make sure that the bearing is dry, otherwise it will be blocked again immediately. Every time the field is cleared, the bearing should be removed for cleaning and oiling.

Automatic Capsule Filling Machine

Automatic Capsule Filling Machine

Automatic Capsule Filling Machine China

Capsule filling machine warranty and maintenance, the filling speed of the capsule filling machine is fast, the size difference of the capsule filling machine is small, the powder filling capsule shell finishing, the capsule cap finishing, and the capsule set are integrated into one, compact and convenient. In addition, the capsule filling machine has a fast arrangement speed.

Cleaning parts

When the machine works for a long time, it should be in regular direct contact with the drug, and it should also be cleaned up when changing the batch of medicine or when it is out of service for a long time.

Add lubricant

The transmission mechanism under the machine's work surface should always be properly lubricated to reduce the wear of moving parts.

Check the amount of oil

The main drive reducer should check the oil amount once a month, and refuel in time when it is insufficient, and replace the lubricating oil every six months; the rotary table indexing box should be changed once every 3000 hours of operation, and 90 # oil is generally used according to experience.

Safety clutch

The safety clutch plays a protective role when the machine is overloaded. The clutch should not slip when the load is normal, but slippage may also occur due to long-term use. When slippage occurs during normal use, the clutch's round nut can be tightened. In order to achieve the purpose of ensuring the normal operation of the machine and can play a protective role.Whether the thimble is too high at the sac shell and cap closure.

There is a way to solve the phenomenon of chopping, shortening the distance between the upper mold and the top plate. Of course, the distance is too short. The principle is: before cutting occurs, it is said to be locked. Our company is China Pharmaceutical Equipment Manufacturer, welcome to consult.

Copyright © Zhejiang Canaan Technology Limited All Rights Reserved | Sitemap